Hangers

Simpson Strong-Tie FGTRHR FGTR Face-Mount Retrofit Girder Tiedown, Right Corner Hip

SKU: FGTRHR
📦 Available to Order — Add to Quote
Madison Township Lumber • Matawan, NJ
(732) 566-5555
Share

Product Description

Simpson Strong-Tie connectors are engineered and tested to perform and are manufactured to the highest quality standards. FGTR products are moderate- to high-load capacity tiedowns for new or retrofit applications. The FGTRHL/R is designed for corner hip applications.

Available Sizes & Options

SKUProductStatus
FGTRHRSimpson Strong-Tie FGTRHR FGTR Face-Mount Retrofit Girder Tiedown, Right Corner Hip CurrentAvailable
IUS1811188Simpson Strong-Tie 1 3/4 x 11-7/8 I Joist HangerAvailable
HUS18110Simpson Strong-Tie 1 3/4 x 9 1/2 Sloped Face Mount HangerAvailable
SUR18111Simpson Strong-Tie 1-3/4 x 11-7/8 Skew 45 R I-beam/lvlAvailable
IUS18195Simpson Strong-Tie 1-3/4 x 9-1/2 Side Mount SingAvailable
1212HLSimpson Strong-Tie 1212HL HL 12 in. x 12 in. 7-Gauge Galvanized Heavy L StrapAvailable
1212HLHDGSimpson Strong-Tie 1212HLHDG HL 12 in. x 12 in. 7-Gauge Hot-Dip Galvanized Heavy L StrapAvailable
1212HLPCSimpson Strong-Tie 1212HLPC HLPC 12 in. x 12 in. 7-Gauge Black Powder-Coated Ornamental L StrapAvailable
1212HTSimpson Strong-Tie 1212HT HT 12 in. x 12 in. 7-Gauge Galvanized Heavy T StrapAvailable
1212HTHDGSimpson Strong-Tie 1212HTHDG HT 12 in. x 12 in. 7-Gauge Hot-Dip Galvanized Heavy T StrapAvailable
1212HTPCSimpson Strong-Tie 1212HTPC HTPC 12 in. x 12 in. 7-Gauge Black Powder-Coated Ornamental T StrapAvailable
1212LSimpson Strong-Tie 1212L 12 in. x 12 in. 14-Gauge Galvanized L StrapAvailable
1212L-RSimpson Strong-Tie 1212L-R 12 in. x 12 in. 14-Gauge Galvanized L StrapAvailable
1212TSimpson Strong-Tie 1212T 12 in. x 12 in. 14-Gauge Galvanized T StrapAvailable
1212T-RSimpson Strong-Tie 1212T-R 12 in. x 12 in. 14-Gauge Galvanized T StrapAvailable
128TSimpson Strong-Tie 128T 12 in. x 8 in. 14-Gauge Galvanized T StrapAvailable
128T-RSimpson Strong-Tie 128T-R 12 in. x 8 in. 14-Gauge Galvanized T StrapAvailable
1616HTSimpson Strong-Tie 1616HT HT 16 in. x 16 in. 7-Gauge Galvanized Heavy T StrapAvailable
1616HTHDGSimpson Strong-Tie 1616HTHDG HT 16 in. x 16 in. 7-Gauge Hot-Dip Galvanized Heavy T StrapAvailable
1616HTPCSimpson Strong-Tie 1616HTPC HTPC 16 in. x 16 in. 7-Gauge Black Powder-Coated Ornamental T StrapAvailable
1616HTQSimpson Strong-Tie 1616HTQ HTQ 16 in. x 16 in. 7-Gauge Hot-Dip Galvanized Heavy T StrapAvailable

Product Details

Key Features

  • Load rated to resist high-wind forces
  • The FGTRHL/R is designed for corner hip applications
  • Screw holes are configured to allow for double installation on a two-ply (minimum) truss

Material

  • Straps: 7 gauge, plate: 3 gauge

Finish

  • Powder coated

Installation

  • Use all specified fasteners; see General Notes.
  • To achieve the loads listed in the load table, the product shall be attached to a grouted and reinforced block wall or a reinforced concrete wall designed by others to transfer the high concentrated uplift loads to the foundation.
  • Strong-Drive® SDS Heavy-Duty Connector screws included.
  • The product can be installed in a single application or in pairs to achieve a higher uplift capacity.
  • Can be installed on roof pitches from 0/12 to 8/12 or on a bottom chord designed to transfer the loads.
  • Only two of the four holes provided on each strap are required to be filled to achieve the published loads. The first 1/2" x 5" Titen HD® heavy-duty screw anchor (THD) shall be installed a minimum of 4" from the top of the wall. Anchors shall not be installed in adjacent holes.
  • Products shall be installed such that non-stainless Titen HD anchors are not exposed to the exterior environment.

Buy Simpson Strong-Tie FGTRHR FGTR Face-Mount Retrofit Girder Tiedown, Right Corner Hip in Central New Jersey

Madison Township Lumber & Supply has been serving Matawan, East Brunswick, Sayreville, and all of Middlesex County since 1962.

Simpson Strong-Tie FGTRHR FGTR Face-Mount Retrofit Girder…