Hangers

Simpson Strong-Tie ABU44Z ABU ZMAX® Galvanized Adjustable Standoff Post Base for 4x4

SKU: ABU44Z
Available at Our Yard
Madison Township Lumber • Matawan, NJ
(732) 566-5555
Share

Product Description

The Simpson Strong-Tie® ABU is designed to attach wooden posts to existing concrete in high capacity applications. The built-in 1-in. standoff of this adjustable post base helps to prevent rot at the end of the post. The ABU has a slotted anchor hole in the base for adjustability and attaches to the post with nails, Strong-Drive® SD Connector screws or bolts. This versatile post base makes a cost-effective option for securing a post to the foundation, with a design built for maximum uplift performance.

Available Sizes & Options

SKUProductStatus
ABU44ZSimpson Strong-Tie ABU44Z ABU ZMAX® Galvanized Adjustable Standoff Post Base for 4x4 CurrentAvailable
ABU66ZSimpson Strong-Tie ABU66Z ABU ZMAX® Galvanized Adjustable Standoff Post Base for 6x6Available

Product Details

Key Features

  • The slot in the base enables flexibility around the anchor bolt, making precise post placement easier
  • 1" stand-off design meets code requirements for structural posts installed in basements or exposed to weather or water splash
  • Increased uplift loads for earthquake or wind loading

Material

  • See table

Finish

  • ZMAX® and some in stainless steel; see Corrosion Information

Installation

  • Installation Guide
  • Use all specified fasteners; see General Notes.
  • See our Anchoring, Fastening and Restoration Systems for Concrete and Masonry catalog for retrofit anchor options, such as Titen HD®, Stainless-Steel Titen HD or SET-3G.
  • Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non-top-supported installations (such as fences or unbraced carports).
  • Place the base, cut washer(s) or load transfer plate(s) and nut(s) on the anchor bolt(s). Make any necessary adjustments to post placement and tighten the nut securely on the anchor bolt.
  • Base anchors must extend less than 1" from concrete to avoid interference with standoff.
  • Place the standoff base and then the post in the ABU.
  • Fasten the post using nails or Strong-Drive SD Connector screws or bolts (ABU88Z, ABU1010Z, ABU1212Z — SDS optional).

Specifications

Model No.
Nominal Post Size
Ga.
W (in.)
L (in.)
H (in.)
HB (in.)
Coating/Material
Packaging Qty.
ABU5-5Z
5 1/8 x 5 1/8
Base 12; strap 10
5 1/4
5
6 1/16
1 3/4
ZMAX®
1
ABU5-6Z
5 1/8 x 6
Base 12; strap 10
6 1/8
5
6 1/16
1 3/4
ZMAX®
1
ABU44RZ
Rough 4x4
Base 16; strap 12
4 1/16
3
5 1/4
1 1/2
ZMAX®
1
ABU44SS
4x4
Base 16; strap 12
3 9/16
3
5 1/2
1 3/4
Stainless Steel
1
ABU44Z
4x4
Base 16; strap 12
3 9/16
3
5 1/2
1 3/4
ZMAX®
1
ABU46RZ
Rough 4x6
12
4 1/16
5
6 3/4
2 3/8
ZMAX®
1
ABU46SS
4x6
12
3 9/16
5
7
2 5/8
Stainless Steel
1
ABU46Z
4x6
12
3 9/16
5
7
2 5/8
ZMAX®
1
ABU65Z
6x5
Base 12; strap 10
5 1/2
5
6 1/16
1 3/4
ZMAX®
1
ABU66RZ
Rough 6x6
Base 12; strap 10
6 1/16
5
5 13/16
1 1/2
ZMAX®
1
ABU66SS
6x6
Base 12; strap 10
5 1/2
5
6 1/16
1 3/4
Stainless Steel
1
ABU66Z
6x6
Base 12; strap 10
5 1/2
5
6 1/16
1 3/4
ZMAX®
1
ABU88HDG
8x8
Base 14; strap 10
7 1/2
7
7
Hot-Dip Galvanized
1
ABU88RHDG
Rough 8x8
Base 14; strap 10
8
7
7
Hot-Dip Galvanized
1
ABU88RZ
Rough 8x8
Base 14; strap 12
8
7
7
ZMAX®
1
ABU88SS
8x8
Base 14; strap 10
7 1/2
7
7
Stainless Steel
1
ABU88Z
8x8
Base 14; strap 12
7 1/2
7
7
ZMAX®
1
ABU1010RZ
Rough 10x10
14
10
9
7
ZMAX®
1
ABU1010Z
10x10
14
9 1/2
9
7 1/4
ZMAX®
1
ABU1212RZ
Rough 12x12
12
12
11
7
ZMAX®
1
ABU1212Z
12x12
12
11 1/2
11
7 1/4
ZMAX®
1

Load Table

Model No. Nominal Post Size Material (ga.) Dimensions (in.) Fasteners Allowable Loads (DF/SP)
Base Strap W L H HB Anchor Dia. (in.) Nails (in.) Bolts Uplift Down (100)
Qty. Dia. (in.) Nails Bolts
ABU44Z 4x4 16 12 3 9/16 3 5 1/2 1 3/4 5/8 (12) 0.162 x 3 1/2 2 1/2 1,900 2,300 7,570
ABU44RZ Rough 4x4 16 12 4 1/16 3 5 1/4 1 1/2 5/8 (12) 0.162 x 3 1/2 2 1/2 1,900 2,300 7,570
ABU46Z 4x6 12 12 3 9/16 5 7 2 5/8 5/8 (12) 0.162 x 3 1/2 2 1/2 2,405 2,265 12,520
ABU46RZ Rough 4x6 12 12 4 1/16 5 6 3/4 2 3/8 5/8 (12) 0.162 x 3 1/2 2 1/2 2,405 2,265 12,520
ABU5-5Z 5 1/8 x 5 1/8 12 10 5 1/4 5 6 1/16 1 3/4 5/8 (12) 0.162 x 3 1/2 2 1/2 2,235 2,235 10,570
ABU5-6Z 5 1/8 x 6 12 10 6 1/8 5 6 1/16 1 3/4 5/8 (12) 0.162 x 3 1/2 2 1/2 2,235 2,235 10,570
ABU65Z 5 1/2 x 5 12 10 5 1/2 5 6 1/16 1 3/4 5/8 (12) 0.162 x 3 1/2 2475 10,960
ABU66Z 6x6 12 10 5 1/2 5 6 1/16 1 3/4 5/8 (12) 0.162 x 3 1/2 2 1/2 2,475 2,190 18,205
ABU66RZ Rough 6x6 12 10 6 1/16 5 5 13/16 1 1/2 5/8 (12) 0.162 x 3 1/2 2 1/2 2,475 2,190 18,205
ABU88Z 8x8 14 12 7 1/2 7 7 (2) 5/8 (18) 0.162 x 3 1/2 4,120 22,405
ABU88RZ Rough 8x8 14 12 8 7 6 3/4 (2) 5/8 (18) 0.162 x 3 1/2 4,045 19,870
ABU1010Z 10x10 14 12 9 1/2 9 7 1/4 (2) 5/8 (22) 0.162 x 3 1/2 2,270 32,020
ABU1010RZ Rough 10x10 14 12 10 9 7 (2) 5/8 (22) 0.162 x 3 1/2 1,830 31,650
ABU1212Z 12x12 12 12 11 1/2 11 7 1/4 (2) 5/8 (22) 0.162 x 3 1/2 3,000 34,745
ABU1212RZ Rough 12x12 12 12 12 11 7 (2) 5/8 (22) 0.162 x 3 1/2 3,000 34,745

Load Table

Model No. Nominal Post Size Fastener Allowable Loads (DF/SP)
Anch. Dia. Post Uplift (160) Down (100)
Screws
ABU44Z 4x4 5/8 12-SD10112 2140 6665
DocumentType
ESR-3096Other
ESR-1622Other

How to Install a Post Base with Stainless-Steel Titen HD® Heavy-Duty Screw Anchors

Buy Simpson Strong-Tie ABU44Z ABU ZMAX® Galvanized Adjustable Standoff Post Base for 4x4 in Central New Jersey

Madison Township Lumber & Supply has been serving Matawan, East Brunswick, Sayreville, and all of Middlesex County since 1962.

Simpson Strong-Tie ABU44Z ABU ZMAX® Galvanized Adjustable…