📦
Fasteners

Simpson Strong-Tie MCW54 MCW 5/8 in. to 1/2 in. Coupler Nut with Witness® Hole, Grade 55

SKU: MCW54
📦 Available to Order — Add to Quote
Madison Township Lumber • Matawan, NJ
(732) 566-5555
Share

Product Description

The Simpson Strong-Tie® MCW coupler nut is designed to connect threaded rods to one another and to anchor bolts. These nuts are designed to exceed the specified minimum tensile capacity of the corresponding bolts and threaded rod. All MCW coupler nuts feature a positive stop to help ensure even threading into each end of the nut and a Witness® hole as a means to verify when rods are properly installed.

Available Sizes & Options

SKUProductStatus
MCW54Simpson Strong-Tie MCW54 MCW 5/8 in. to 1/2 in. Coupler Nut with Witness® Hole, Grade 55 CurrentAvailable
10D5HDG-RSimpson Strong-Tie 10D5HDG-R Strong-Drive® SCN SMOOTH-SHANK CONNECTOR Nail — 3 in. x 0.148 in. HDG (250-Qty)Available
10DHDG-RSimpson Strong-Tie 10DHDG-R Strong-Drive® SCN SMOOTH-SHANK CONNECTOR Nail — 3 in. x 0.148 in. HDG (50-Qty)Available
16D5HDG-RSimpson Strong-Tie 16D5HDG-R Strong-Drive® SCN SMOOTH-SHANK CONNECTOR Nail — 3-1/2 in. x 0.162 in. HDG (200-Qty)Available
16DHDG-RSimpson Strong-Tie 16DHDG-R Strong-Drive® SCN SMOOTH-SHANK CONNECTOR Nail — 3-1/2 in. x 0.162 in. HDG (40-Qty)Available
516TH4Simpson Strong-Tie 5/16 x 4 Timber Hex ScrewAvailable
7/8 NUTSimpson Strong-Tie 7/8 NUT Uncoated Steel Hex Nut for 7/8 in. Rod (20-Qty)Available
8DBRPT2500Simpson Strong-Tie 8DBRPT2500 Strong-Drive® 33° SCN SMOOTH-SHANK CONNECTOR Nail — 2-1/2 in. x .131 in. Bright (2500-Qty)Available
8DHDGPT2500Simpson Strong-Tie 8DHDGPT2500 Strong-Drive® 33° SCN SMOOTH-SHANK CONNECTOR Nail — 2-1/2 in. x .131 in. HDG (2500-Qty)Available
8DHDGPT500Simpson Strong-Tie 8DHDGPT500 Strong-Drive® 33° SCN SMOOTH-SHANK CONNECTOR Nail — 2-1/2 in. x .131 in. HDG (500-Qty)Available
CB810PCSimpson Strong-Tie BasesAvailable
CB88PCSimpson Strong-Tie BasesAvailable
CB46PCSimpson Strong-Tie BasesAvailable
CB44PCSimpson Strong-Tie BasesAvailable
CB68PCSimpson Strong-Tie BasesAvailable
CB48PCSimpson Strong-Tie BasesAvailable
CNW1 1/4Simpson Strong-Tie CNW1 1/4 CNW 1-1/4 in. Coupler Nut with Witness® HoleAvailable
CNW1Simpson Strong-Tie CNW1 CNW 1 in. Coupler Nut with Witness® HoleAvailable
CNW1-7/8Simpson Strong-Tie CNW1-7/8 CNW 1 in. to 7/8 in. Coupler Nut with Witness® HoleAvailable
CNW1/2Simpson Strong-Tie CNW1/2 CNW 1/2 in. Coupler Nut with Witness® HoleAvailable
CNW3/4Simpson Strong-Tie CNW3/4 CNW 3/4 in. Coupler Nut with Witness® HoleAvailable

Product Details

Key Features

  • Couplers use a Witness hole to ensure proper installation
  • Positive stop feature that helps ensure proper thread engagement into each end of the nut on straight-through models
  • CNW models do not have any notches; HSCNW models are indicated with a single notch; MCW models are indicated with two notches

Finish

  • Zinc plated or uncoated

Options

  • Available in standard strength, medium strength and high strength depending on corresponding rod in use
  • Couplers available with oversized threads on one end for installation on hot-dip galvanized bolts (add –OST to model for ordering)
  • OST couplers are typically oversized on one end of the coupler nut only and will be marked with an “O” on oversized side

Installation

  • Tighten the two rods until each all-thread rod is visible in the Witness hole. Any portion of thread visible in the Witness hole is a correct installation.
  • For transition couplers, thread the coupler onto the larger rod first, and then thread the smaller rod into the coupler.
  • Standard CNW, HSCNW or MCW models for use with non-hot-dip galvanized all-thread rod only.

Related Links

Catalog Pages

Buy Simpson Strong-Tie MCW54 MCW 5/8 in. to 1/2 in. Coupler Nut with Witness® Hole, Grade 55 in Central New Jersey

Madison Township Lumber & Supply has been serving Matawan, East Brunswick, Sayreville, and all of Middlesex County since 1962.

Call (732) 566-5555Get Directions
Simpson Strong-Tie MCW54 MCW 5/8 in. to 1/2 in. Coupler…