Simpson Strong-Tie WT10 Wedge Tie for 2x Formboard, 10-in. Thick Walls (250-Qty)
Product Description
The Simpson Strong-Tie® wedge tie (WT) is a form tie that secures concrete forms in place while the concrete is poured. It easily installs between form boards and accurately spaces the forms. Several models are available for varying wall thickness and types of form boards.
Available Sizes & Options
Product Details
Material
- W1 — 14 gauge; WT — 18 gauge
Finish
- Galvanized
Installation
- Two W1 wedges are required for each tie
- Not recommended for wall pours greater than 4' high
- Wall thickness from 6" to 12"
The spacing of the WTs along the length of the form depends on the depth of the WT in the form. The spacing does not depend on the thickness of the wall. The maximum recommended spacing for WTs used with 1x, 2x and 1 1/4" thick forms is outlined in the tables below. The tables give spacing guidelines for various form heights and types of form boards. In general, the higher the form is, the closer the spacing of the WTs should be.
Catalog Pages
Buy Simpson Strong-Tie WT10 Wedge Tie for 2x Formboard, 10-in. Thick Walls (250-Qty) in Central New Jersey
Madison Township Lumber & Supply has been serving Matawan, East Brunswick, Sayreville, and all of Middlesex County since 1962.